100A High Power Latching Relay

You can rest assured to buy 100A High Power Latching Relay from our factory and we will offer you the best after-sale service and timely delivery.As the professional manufacturer, we would like to provide you Latching Relay. And we will offer you the best after-sale service and timely delivery.

Latching relay.

100A contact switching capability.

Max.Inrush current of 500A/2ms.

DC load capability of 100A/60VDC.

Electrical endurance capability: breaking under 2000A for 0.3ms for 300 times.

Suitable for smart home, PV, automatic equipment, smart meter, etc.

Ordering Information

1 Part number: NT96L

2 Contact arrangement: A:1A;C:1C;

3 Coil: Nil:Single coil; D:Double coils

4 Enclosure: Z: Flux proof; S: Wash tight

5 Polarity: Nil: Standard; R: Reverse polarity

6 Type of load: Nil: AC rating; L:DC rating

7 Contact gap: Nil: Standard; S:1.5mm

8 Coil rated voltage(V): DC: 6,9,12,24,48

1) 1.5mm contact gap only applies to A type.

Contact Data

Coil Parameter

CAUTION: 

1.When latching relays are installed in equipment, the latch and reset coil should not be powered simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the

relay. If these conditions are not followed, it is possible for the relay to in be the magnetically neutral position .

2.The above set voltage, reset voltage are the test value for relay without load. Please use 1~1.5 times of rated voltage to drlve the relay for your application

Characteristics

Dimensions

CAUTION: 

In case of no tolerance shown in outline dimension: outline dimension ≤1mm,tolerance should be±0.2mm;outline dimension >1mm and ≤5mm, tolerance should be±0.3mm; outline dimension >5mm, tolerance shouldbe±0.4mm.