Subminiature Intermediate Power Latching Relay

The following is the introduction of high quality Subminiature Intermediate Power Latching Relay, hoping to help you better understand it. Welcome new and old customers to continue to cooperate with us to create a better future! Sincerely look forward to cooperating with you in the near future.
◉ High Sensitivity
◉ Low power consumption
◉ High contact capacity 2A 30VDC
◉ Conforms to FCC Part 68 1500V Surge and Dielectric 1000VAC
◉ RoHS Compliant

Model:PK

DIL pitch terminals. High sensitivity :0.14W or 0.10W nominal power.
Conforms to FCC Part 68 1.5kV surge and dielectric 1000VAC.
Monostable, single or double coil latching relay .
Application for telecommunication equipment, office equipment, security alarm systems, measuring instruments,

medical monitoring equipment, audio visual equipment, flight simulator, sensor control.

Ordering Information

1 Part number:P

2 Operating function:

NIL: Single Side Stable;

L:1 Coil Latching; K:2 Coil Latching

3 Coil rated voltage(V):DC:3,4.5,5,6,9,12,24

4 Contact material:NIL: AgPd; W: AgNi

Contact Data

CAUTION:

Relays previously tested or used above 10mA resistive at 6V maximum DC or peak AC open circuit are not recommended for subsequent use in low level applications.

Coil Parameter

CAUTION:

1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.

2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design criteria.
3.When latching relays are installed in equipment, the set and reset coil should not be powered simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to be in the magne-tically neutral position .

Characteristics

Electrostatic Capacitance
Between Open Contacts	Approx.0.4pF	Item4.41 of IEC 61810-7
Between Coil & Contacts	Approx.0.9pF	Item 4.41 of lEC 61810-7
Between Contact Poles	Approx.0.2pF	Item 4.41 of lEC 61810-7
Insulation Resistance	1000MΩ min(at 500VDC)	Item 4.11 of IEC 61810-7
Dielectric Strength
Between Open Contacts Between Coil & Contacts Between Contact Poles	1000VAC 1min 1000VAC 1min 1000VAC 1min	Item 4.9 of lEC 61810-7
Surge Withstand Voltage
Between Open Contacts Between Coil &Contacts Between Contact Poles	1500V 1500V 2500V	FCC68
Shock Resistance	Functional:490m/s² 11ms; Destructive:980 m/s² 6ms	Item 4.26 of lEC 61810-7
Vibration Resistance	10Hz~55Hz Double amplitude Functional: 3mm Destructive:5mm	Item 4.28 of lEC 61810-7
TerminalsStrength	5N	Item 4.24 of lEC 61810-7
Temperature Range	-40℃~70℃(-40° F~158° F)
Mass	Approx1.5g	Item 4.7 of lEC 61810-7